Copyright 2019, Fuze
Utilizing Parking
Call parking is the ability to put calls on
hold on one phone and then be able to
pick up that call from another phone
• Tap on one of the available park line on the
phone
- The call will go into the selected parking lot
• Tap the corresponding park line to the
parked call
- The call will be connected through to the
phone
32
With visual parking, a user can see which lots are available. A red icon will appear
next to the corresponding line appearance, if the parking lot is in use.
Non-visual parking is also available. With Non-visual parking, the user will not see
parking lots displayed as line keys.
To utilize Non-visual parking:
•Tap the Transfer soft key, enter **70 to hear the parking lot number, wait for the
system to announce the lot number, and then tap the Transfer soft key
•To retrieve a parked call, tap the Pickup soft key, enter the digit of the parking lot
that the call is in, then tap the Enter soft key
OR
• Dial **7x, where x is the lot number, and then tap the Dial/Send soft key
32
To Next Page
Loading...
