CHANGING TRANSFER DEFAULT
If you do many more blind transfers than consulted transfers, you can change the default
transfer type to blind.
Press the Home button
Tap Settings (the Gear icon)
Press 1 on keypad or tap onscreen Basic
Press 1 on keypad, or scroll to and select onscreen Preferences
Press 12 on keypad, or scroll to and select onscreen Default Transfer Type
Tap onscreen Blind to check the box
Press Home button twice to exit menus
Now you can swap the above instructions for blind and consulted transfer
Three-Way Calling/Conference Call
This is a standard function that allows you to talk to two parties at the same time. If your
account is configured as an Executive User, you may speak to up to five parties at once.
While on an active call, let Caller A know you’ll be right back with Caller B
Tap the Confrnc softkey (this puts Caller A on hold)
Dial Caller B’s number, press Pound (#) to send the digits immediately
After Caller B answers, let him know you will be conferencing in Caller A
Tap the Confrnc softkey
Now everyone is together
Your display will show Conference
When you finish speaking with everyone, tap the End Call softkey to be certain everyone is
disconnected.
You can also join an incoming call with an active call
While on a call with Caller A, you get a call from Caller B
To include Caller B, let A know you'll be right back with B
Press Answer softkey (This puts A on hold and answers B)
Press More softkey then Join softkey
Now everyone is together
Your display will show Conference
To Next Page
Loading...
