Last
Door
Closed Locking
and
Lockout Prevention
Your
vehicle
comes with this feature set in Mode
2.
To
change the factory setting, do the following:
1. Press the LOCK switch
on
the door.
2.
Count
the
number
of
chimes you hear. The number
of
chimes
tells
you which mode your vehicle is set for.
3.
Press the
LOCK
switch on the door until you hear
the number
of
chimes that correspond to the mode
selection you want.
These features are designed to help prevent your keys
from being locked in your vehicle.
Mode
1:
Both
Off
(Doors will lockhnlock when you
press the power door lock switch.)
Mode
2:
Lockout Prevention
Only
(If
you leave your keys
in
the ignition and get out
the
driver’s door, you won’t
be
able
to
lock the doors with the power door lock switch.)
Mode
3:
Last Door Closed Locking Only (If the power
door lock switch is used to lock the vehicle while any
door is open, you will hear three chimes. The doors will
not lock until after all doors are closed.)
Mode
4:
Both On (This combines Mode
2
and
3.)
Remote Keyless Entry Lock Verification
Your vehicle
comes
with
this
feature set in Mode
5.
To
change the factory setting, do the following:
1.
Press the
UNLOCK
button
on
the remote keyless
entry
transmitter.
2.
Count the number
of
chimes you hear.
The
number
of chimes tells you which mode your vehicle is
set for.
3.
Press the UNLOCK button on the remote keyless
entry transmitter until you hear the number
of
chimes
that
corresponds
to
the
mode selection
you want.
This feature provides feedback when the vehicle
receives a command from the remote keyless
entry transmitter.
To Next Page
Loading...
