Mode
1:
All
Off
(The headlamps will not flash and the
horn
will
not sound to provide you feedback that a
lockhnlock command has been received by the remote
keyless entry transmitter.)
Mode
2:
Horn and Lamps/Lamps (Your horn
will
sound
briefly and your parking lamps will flash when you press
LOCK on the remote keyless entry transmitter. Only your
parking lamps will flash when you press UNLOCK.)
Mode
3:
Horn and Lamps (Your horn will sound briefly
and your parking lamps will flash every time you press
LOCK or UNLOCK.)
Mode
4:
Lamps
(Your parking lamps will flash every
time you press LOCK or UNLOCK.)
Mode
5:
LampdHorn
and
LampdLamps
(Your
lamps
will
flash upon the first press on
LOCK,
your lamps will flash
and your horn will sound upon the second press on LOCK
and your lamps will flash upon any press on
UNLOCK.)
Theft-Deterrent Arming Method
Your vehicle comes with
this
feature set in Mode
3.
To
change the factory setting,
do
the following:
1.
Press the UNLOCK switch on the door.
2.
Count the number of chimes you hear. The number
of chimes tells you which mode your vehicle is
set for.
3.
Press the UNLOCK switch on the door until you
hear the number of chimes that correspond to the
mode selection you want.
Mode
1:
Alarm
System
Off
(The system will not
arm.)
Mode
2:
Remote Keyless Entry Transmitter Lock
(When
you
lock
your
doors
using
the
remote keyless
entry transmitter, the system will
arm
itself.)
Mode
3:
Remote Keyless Entry TransmitterPower
Door Lock Switch
(If
you use either
the
remote keyless
entry transmitter or the power
door
lock switch to lock
the doors, the system will
arm
itself.)
Mode
4:
Passive Arming and Remote Keyless Entry
TransmitterPower Door Lock Switch Arming (The
system will
arm
itself after
all
doors are closed plus
arming per Mode
3).
2-21
To Next Page
Loading...
