RECOVERY MODE
(included in software revision CLR-P24F-253 and above)
Recovery mode will run the filtration system and chlorinator for the amount of time set in
SETTINGS - RECOVERY (default setting is 24 hours), then revert back to AUTO filtration
mode. This may be useful when additional filtration and/or chlorination is required after
periods of heavy use, or when cleaning / preparing a pool for the swimming season.
To enter RECOVERY mode:
– From the HOME view, press and hold the UP button for at least 5 seconds.
– The display will cycle to show the recovery time remaining.
To exit RECOVERY mode:
– Press the MODE button once to put the system into OFF mode.
– This will cancel the recovery timer.
– Set the mode as required to resume normal operation.
To set the RECOVERY MODE timer period:
– From the MAIN MENU navigate to SETTINGS, and press VIEW.
– Navigate to the RECOVERY field and press VIEW to edit.
– Use the UP and DOWN buttons to adjust the time in HOURS (1 – 48 hours).
– Press the view button to save the setting.
– Press the BACK button to exit.
PLUMBING FLUSH
This feature is automatic, no programming or adjustments are necessary. When in AUTO
mode, the cell power will automatically switch off 30 seconds before the pump to ensure
cell housing and plumbing is flushed of concentrated chlorine. This unique feature
prevents high chlorine levels in the pipework diffusing through and corroding heater tube
bundles and the possibility of damaging other sensitive equipment up-stream of the cell.
SPA FLOW (PL PLUS AND MAX MODELS ONLY)
A spa flow switch (sold separately) is available for use on pool and spa combination
systems. This should be installed on the spa suction line so that the Pool Lab Chlorinator
will know when the spa is in use. Stand-alone chlorinators will cease chlorine production
when the spa flow switch is activated to prevent over-chlorination of the spa while in use.
If a Pool Lab ASP is connected, the system will adjust its chlorine and acid delivery
algorithms to suit the smaller volume of water while the spa is in use.
12
To Next Page
Loading...