PL CHLORINATOR MODELS
PL Classic / PL ECO
Stand-alone salt chlorinators that includes all the features you need for a basic system.
Suitable for use on swimming pools that are a single body of water. These models are not
recommended for spas or pool and spa combination systems, and do not provide
connectivity with the Pool Lab add-on modules. See Plus and MAX models below.
PL Plus
An advanced salt chlorinator suitable for use on pools, and pool and spa combination
systems
1
. Compatible with the Pool Lab ASP that enables automatic pH and free chlorine
level control, and the Pool Lab EXP that enables additional features such as integrated
solar and gas heating controls as well as control of third party equipment such as lighting,
pumps and flow control valves.
Plus (and MAX) models are also suitable for spa only
2
systems when used in conjunction
with the Pool Lab ASP.
PL MAX
The flagship of the Pool Lab Salt Chlorinator range. This model includes all the features of
the Plus model and also includes multi-speed pump control, and is Wi-Fi
®
enabled. With
apps available for iOS and Android this allows for remote monitoring and control of your
system from anywhere in your home, or anywhere in the world
3
! Smart speaker
integration is also possible with skills available for most popular devices.
PL HYBRID (PL COMM & PL LT)
The commercial version of the Pool Lab Salt Chlorinator is a system that can be scaled to
suit your requirements. The PL COMM is the “Commander” and you can add up to four
additional PL LT “Lieutenant” chlorinators for a total chlorine output of between 45 – 225
grams per hour (chlorine gas). The PL COMM is specifically designed to operate in
conjunction with the Pool Lab ASP and also features the ability to feed liquid chlorine to
meet chlorine demand even under extreme conditions. This model includes compatibility
with the Pool Lab add-on modules, multi-speed pump control, and is Wi-Fi® enabled with
apps available for iOS and Android.
RATED CHLORINE OUTPUT
Chlorine output is measured in units of grams of chlorine gas per hour (gm/hr).
PL Classic, Plus and MAX models are available in 25gm/hr, 35gm/hr and 45gm/hr
variations. PL Hybrid models are all rated at 45gm/hr, and one Commander can operate by
itself or optionally control up to 4 x Lieutenants for total rated output options of 45gm/hr,
90gm/hr, 135gm/hr, 180gm/hr and 225gm/hr.
1 Pool and Spa combination systems require a spa flow switch, sold separately.
2 Spa only systems require the ASP add-on module, and do not require a spa flow switch.
3 Requires internet connection on the network that the Pool Lab MAX is connected to and internet
connection on the device running the Pool Lab app.
15
To Next Page
Loading...
