poolstar POOLEX - 2. DESCRIPTION; Package contents; Characteristics

8 | EN
At recepon, please check that your package contains the following:
• A Poolex heat pump
• 2x 1"1/2 (inch) to DN48.3 hydraulic connections
• 1x spa heater control relay
• 4x an-vibraon pads (directly mounted on the heat pump)
• Drainage kit
• This installaon and operaon manual
2. DESCRIPTION
2.1 Package contents
Air
(1)
15°C
Water
(2)
26°C
Heating power (kW) 2.02 - 5.04
Consumption (kW) 0.27 - 1.18
COP (Coe. of performance) 7.48 - 4.26
Air
(1)
26°C
Water
(2)
26°C
Heating power (kW) 2.75 – 6.84
Consumption (kW) 0.22 – 1.18
COP (Coe. of performance) 12.5 – 5.78
Air
(1)
35°C
Water
(2)
27°C
Cooling capacity (kW) 1.5 – 3.14
Consumption (kW) 0.30 – 1.08
EER 5.0 – 2.9
Power supply Single phase 220-240Vac ~ 50Hz
Maximum power
2.0 kW
Maximum current 9 A
Heating temperature range (water temperature) 15°C ~ 40°C
Operating range (ambiant air temperature) - 20°C ~ 40°C
Unit dimensions L×P×H (mm) 750 x 460 x 460 mm
Unit weight (kg) 38 kg
Sound pressure level 10 m (dBA)
(3)
< 33
Hydraulic connections (mm) D50
Heat exchanger PVC tank and tianium heating coil
Advised water ow (m³/h) 2.0 m³/h
Compressor type Rotary
Refrigerant / Loaded volume (kg) R32 / 0.4 kg
Protection rating IPX4
Load loss (mCE) 1.2
Control panel Digital and Wi
Modes Heating and cooling
The technical specicaons of our heat pumps are provided for informaon purposes only. We reserve the right
to make changes without prior noce.
1
Ambient air temperature
2
Inial water temperature
3
Noise level at a distance of 10 m in accordance with internaonal standards EN ISO 3741 and EN ISO 354
2.2 Characteristics