poolstar POOLEX - Control buttons operating instructions

EN | 17
EN
4. USE
4.2 Control buttons operating instructions
No. Funcon Descripon
1
Unlocking/locking the
keyboard
To unlock/lock the buons.
Press UP + DOWN for 3s
2 Turn On/O the Heat Pump Press ON/OFF for 3s
3 Check running parameters
1. Press DOWN for 3s
2. Use UP and DOWN for parameters browsing
3. Click ON/OFF to exit
4 Choose mode
Press MODE for 3s to switch from one operang mode to the
other (heang/cooling)
5 Adjust temperature
Adjust the current mode seng temperature
Press UP or DOWN
6 Adjust me
1. Press PARAMETER and UP for 3s to set clock.
► The hour ashes.
2. Press UP or DOWN to increase / decrease by one hour.
Hold UP or DOWN to go faster.
3. Press again PARAMETER.
► The minutes ashe.
4. Press UP or DOWN to increase / decrease by one minute.
Hold UP or DOWN to go faster.
5. Press PARAMETER to nish.
7 Adjust ming
1. Press PARAMETER for 3s to set periods.
► The hour of "Timing On 1" ashes.
2. Press UP or DOWN to increase / decrease by one hour.
Hold UP or DOWN to go faster.
3. Press again PARAMETER.
► The minutes of "Timing On 1" ashe.
4. Press UP or DOWN to increase / decrease by one minute.
Hold UP or DOWN to go faster.
5. Press again PARAMETER.
► The hour of "Timing O 1" ashes.
6. Repeat steps 2 to 4 to set "Timing O 1".
5. Press again PARAMETER then repeat steps 2 to 4 to set
other periods of me (Timing On/O 2, Timing On/O 3,
etc.).
5. Press ON/OFF to nish.
Note: when "Timing On" and "Timing O" are the same, the
mer seng of the current me period is canceled.