poolstar POOLEX - Check the advanced settings; Restore factory settings

18 | EN
No. Funcon Descripon
8 Forced defrosng
Press MODE + DOWN to force defrosng.
► The defrost symbol ashes in the display.
9 Frequency mode switch
Switches between frequency modes: silent mode, smart
mode, powerful mode.
Press PARAMETER to switch from one frequency mode to
another.
10
Change the temperature
unit (°C or °F)
The unit must be turned o to change the temperature unit.
Device switched o, press ON/OFF + MODE for 3s.
► The unit changes from Celsius to Fahrenheit or vice
versa.
11
Turn on electric heater
manually
Press UP pendant 3s to acvate/deacvate the heater.
12
Check the advanced
sengs
1. Press ON/OFF + PARAMETER for 5s to enter the advanced
sengs interface.
► The me area shows 0000: it is the password interface.
2. Press UP and DOWN to enter the password and then press
PARAMETER to conrm.
Check frequency
Password: 8866
The target frequency is displayed instead of the hour.
The running frequency is displayed instead of the minutes.
Check system parameters
Password: 0814
See §4.6
13 Restore factory sengs
The unit must be turned o to restore the factory sengs.
Press PARAMETER + MODE + UP + DOWN for 3s.
► The buzzer beeps twice. All parameter values are reset to
the default values.
4. USE