EN | 3
These installaon instrucons form an integral part of the product.
They must be provided to the installer and kept in a safe place by the user.
If you lose this manual, please visit our website:
www.poolex.fr
The indicaons and warnings contained in this manual should be carefully read and understood as they provide
important informaon regarding the safe handling and operaon of the heat pump. Keep this manual handy for
future reference.
Installaon must be carried out by a qualied professional person in accordance with current regulaons and
the manufacturer’s instrucons. An installaon error may cause physical injury to people or animals as well as
mechanical damage for which the manufacturer can under no circumstances be held responsible.
Aer unpacking the heat pump, please check the contents of any signs of damage.
Prior to connecng the heat pump, ensure that the informaon provided in this manual is compable with the
actual installaon condions and does not exceed the maximum limits authorised for this parcular product.
In the event of a defect and/or malfuncon of the heat pump, the electricity supply must be disconnected
and no aempt made to repair the fault. Repairs must be undertaken only by an authorised technical service
organisaon using original replacement parts. Failure to comply with the above-menoned clauses may have an
adverse eect on the heat pump’s safe operaon.
To guarantee the heat pump’s eciency and sasfactory operaon, it is important to ensure its regular
maintenance in accordance with the instrucons provided.
In the event the heat pump is sold or transferred to a third party, please ensure that all technical documenta-
on is given to the new owner alongside the equipment.
This heat pump is exclusively designed to heat a SPA. All other uses must be inappropriate, incorrect, or even
dangerous.
PLEASE READ CAREFULLY
! !
All contractual and extra-contractual liability on the part of the manufacturer / distributor shall be
considered null and void in the event of damage caused by errors in installaon or operaon, or due to
non-compliance with the instrucons provided in this manual, or the standards in force for the installaon
of equipment discussed in this document.