Recommended hydraulic oils
Manufacturer Oil specification
OMV ATF II
SHELL Donax TA
ELF Hydrelf DS 46
ESSO Univis N46
CASTROL Hyspin AWH-M 46
ARAL Vitam VF46
GENOL Hydraulic oil 520
FUCHS Plantohyd 32S * / Renolin B46 HVI
*.....biological hydraulic oils
Oil filter
1 Filter cover 2 Filter insert
The filter insert should be changed every time the oil is changed.
Any aluminium particles can be disregarded, as these occur when the pump is running in.
Do not wash out the filter insert with petrol or paraffin products, as these damage it.
Changing the transmission oil
The first oil change should be carried out after 100 operating hours, further oil changes
should then be carried out every 500 operating hours or yearly.
1 Oil inlet screw 3 Oil drain screw
2 Oil level screw
10.2.2
10.2.3
Maintenance
33
To Next Page
Loading...
Need help?
General
