Power Electronics VS65 Series User Manual

POWER ELECTRONICS
VS65
SAFETY INSTRUCTIONS
7
SAFETY INSTRUCTIONS
IMPORTANT!
 Read this manual carefully to maximise the performance of this product and to ensure its safe
use.
 In this manual, safety messages are classified as follows:
WARNING
Do not remove the cover while the power is applied or the unit is in operation.
Otherwise electric shock could occur.
Do not run the softstarter with the front cover removed.
Otherwise you may get an electric shock due to the high voltage terminals or exposure of
charged capacitors.
Do not remove the cover except for periodic inspections or wiring, even if the
input power is not applied.
Otherwise you may access the charged circuits and get an electric shock.
Operate the switches with dry hands.
Otherwise you may get an electric shock.
Do not use cables with damaged insulation.
Otherwise you may get an electric shock.
Do not subject the cables to abrasions, excessive stress, heavy loads or pinching.
Otherwise, you may get an electric shock.
CAUTION
Install the softstarter on a non-flammable surface. Do not place flammable material
nearby.
Otherwise fire could occur.
Disconnect the input power if the softstarter gets damaged.
Otherwise it could result in a secondary accident or fire.
Do not apply power to a damaged softstarter or to a softstarter with parts missing
even if the installation is complete.
Otherwise you may get an electric shock.
Do not allow lint, paper, wood chips, dust, metallic chips or other foreign matter
into the softstarter.
Otherwise fire or accident could occur.

Power Electronics VS65 Series Specifications

General

Brand	Power Electronics
Model	VS65 Series
Category	Controller
Language	English