PowerBox CORE - Page 7

www.powerbox-systems.com
7
- Audio
The Audio menu enables you to set different volume
levels. In the right-hand eld you can set the volume
to a xed value.
However, you also have the option of assigning a ro-
tary control or switch for this purpose. The rst step
is to click on the central eld, which causes a further
context window to open where you can assign a
transmitter control. All you have to do here is move
the rotary control or switch which you wish to use
for volume adjustment. When you leave the Context
menu in which you assigned the control, you will see
directly in the Audio menu how the rotary control or
switch alters the volume level.
d) Creating a model
Select the Model button in the Main menu, and
you will see an overview of all models stored in the
transmitter.
You can also set up, rename or erase models and
model folders.
At this point you can also store pictures (215 x 100
pixels, *.jpg or *.png) for your model, and reset the
model operating time. The Export function makes it
swift and simple to export a model le onto a USB
memory stick.
Note: don’t erase the Demo model! The CORE cannot start if you erase all models from its memory!
To create a new model, briey touch the + button
at the bottom of the screen. Assign a name to your
model, and conrm your choice with OK. You will
now see the Select screen for the model type.
At this point you can select the appropriate model
type, with the additional options of delta wing and
V-tail.