Powermatic PM2000B - Kit Configurations

9
Main materials
Main table (PM2000B)
cast iron
Main table (PM2000BT)
cast iron with industrial-grade low-friction coating
Table insert
aluminum
Extension wings (PM2000B)
cast iron
Extension wings (PM2000BT)
cast iron with industrial-grade low-friction coating
Cabinet
steel
Base
steel
Center trunnion
cast iron
Bearing arm
cast iron
Pulleys
steel
General Dimensions
Base footprint
23 x 28 in. (584 x 711 mm)
Assembled, w/ extension wings only, L x W x H
42-5/8 x 32-3/4 x 40-3/8 in. (1083 x 832 x 1026 mm)
Assembled, with 30-in. rail set, L x W x H
66-3/4 x 39-1/8 x 40-3/8 in. (1694 x 993 x 1026 mm)
Assembled, with 50-in. rail set, L x W x H
84-3/4 x 39-1/8 x 40-3/8 in. (2151 x 993 x 1026 mm)
Caster elevation (approximate)
3/4 in. (19 mm)
Shipping dimensions, saw only, L x W x H
29-7/8 x 33 x 43-1/2 in. (760 x 840 x 1105 mm)
Weights
Saw only – net weight
385 lb. (175 kg)
405 lb. (184 kg)
398 lb. (181 kg)
Saw only – shipping weight
535 lb. (243 kg)
555 lb. (252 kg)
548 lb. (249 kg)
1
Note: For 460V operation, an overload relay (Part No. PM2000B-2107BORA) must be purchased separately and
installed. A qualified electrician is recommended.
2
subject to local/national electrical codes.
3
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As workplace
conditions vary, this information is intended to allow the user to make a better estimation of the hazards and risks
involved only.
L = length, W = width, H = height, D = depth
n/a = not applicable
5.1 Kit Configurations
Stock numbers
Saw only
PM231B
PM251B
PM253B
Saw with 30-inch rail set, wood ext table
PM23130K
PM25130K
PM25330K
Saw with 50-inch rail set, wood ext table
PM23150K
PM25150K
PM25350K
Saw with 50-inch rail set & router lift
PM23150RK
PM25150RK
PM25350RK
Saw with 50-inch rail set & workbench
PM23150WK
PM25150WK
PM25350WK
Stock numbers
Saw only
PM231BT
PM251BT
PM253BT
Saw with 30-inch rail set, wood ext table
PM23130KT
PM25130KT
PM25330KT
Saw with 50-inch rail set, wood ext table
PM23150KT
PM25150KT
PM25350KT
Saw with 50-inch rail set & router lift
PM23150RKT
PM25150RKT
PM25350RKT
Saw with 50-inch rail set & workbench
PM23150WKT
PM25150WKT
PM25350WKT
Table 2
The specifications in this manual were current at time of publication, but because of our policy of continuous
improvement, Powermatic reserves the right to change specifications at any time and without prior notice, without
incurring obligations.