EasyManua.ls Logo

PowerShield Commander 1100 - Warning Indicator

PowerShield Commander 1100
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3 OPERATIONS continued
Warning Icon (flashing) Alarm
Low Battery Rapid one beep every second
Overload 2 short beeps every 2 seconds
Battery is not
connected
2 short beeps every 2 seconds
Overcharge Continuously sounding
Site wiring fault 2 short beeps every 2 seconds
EPO enable 2 short beeps every 2 seconds
Over temperature Continuously sounding
Charger failure Continuously sounding
Battery Fault Continuously sounding
(At this time, UPS is off to remind users of
something wrong with battery)
Replace Battery 2 short beeps every 2 seconds
EEPROM error 2 short beeps every 2 seconds
3-8. Warning Indicator
19