EasyManua.ls Logo

powersoft T Series - Menu System

powersoft T Series
71 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
INDEX
42
T-SERIES | SERVICE MANUAL
12. The procedure will take approx. 10 min.
13. When the procedure is nished you will see the Upgrading bar totally blue colored.
Remember to change again the IP address on your PC as it was before starting the procedure
14. To end the Update the amplier must reboot and back to normal condition as after power up
15. Pay attention
All preset and setup of the amp has been erased except the serial number and mac address that has been saved into the EPROM of
the main board

Other manuals for powersoft T Series

Related product manuals