8
Powerware 9315 (200 kVA---300 kVA) Operation
164201036 Rev. D 041500
Symbols, Controls, a nd Indicators
These symbols may appear on your UPS system or on labels inside the UPS. They
are accepted by most international safety agents. Everyone in your organization
who works with your UPS should understand the meaning of these symbols:
ON
The principal power switch is in the “On” position.
OFF
The principal power switch is in the “Off” position.
PHASE
The word “phase.”
CAUTION: REFER TO MANUAL
Stop and refer to the Operator’s Manual for more information.
RISK OF ELECTRIC SHOCK
There is a risk of electric shock present, and you should observe
associated warnings. The UPS contains high voltages.
To Next Page
Loading...
