PPC 300 - Page 46

300 Card Printer – User Guide
46
Error code 13:11
Reason: While updating the dye control calibration, the printer detected that the blue duty cycle was out of
range.
Error code 13:12
Reason: While updating the dye control calibration, the printer detected that the green duty cycle was out of
range.
Error code 13:13
Reason: While updating the dye control calibration, the printer detected that the green and blue duty cycles
were out of range.
Error code 13:14
Reason: While updating the dye control calibration, the printer detected that the red duty cycle was out of
range.
Error code 13:15
Reason: While updating the dye control calibration, the printer detected that the red and blue duty cycles were
out of range.
Error code 13:16
Reason: While updating the dye control calibration, the printer detected that the red and green duty cycles
were out of range.
Error code 13:17
Reason: While updating the dye control calibration, the printer detected that the red, green and blue duty cycle
were out of range.
Error code 13:18
Reason: While updating the dye control calibration, the printer detected that the motor current was out of
range.
Error code 13:19
Reason: While updating the dye control calibration, the printer detected that the motor current and blue duty
cycle were out of range.
Error code 13:20
Reason: While updating the dye control calibration, the printer detected that the motor current and green duty
cycle were out of range.
Error code 13:21
Reason: While updating the dye control calibration, the printer detected that the motor current and green and
blue duty cycles were out of range.
Error code 13:22
Reason: While updating the dye control calibration, the printer detected that the motor current and red duty
cycle were out of range.