Model PD690 Universal Process Meter Instruction Manual
Safety Notice
Observe all safety regulations. Electrical wiring should be
performed in accordance with all applicable national, state
and local codes to prevent damage to the Meter and ensure
personnel safety.
Do not use this meter to directly drive heavy equipment such
as pumps, motors, valves, etc.
It is recommended to use this meter in a fail-safe system
that accommodates the possibility of meter failure or power
failure.
WARNING
Hazardous voltages exist within enclosure. Installation
and service should be performed only by trained service
personnel.
AVERTISSEMENT
Les pièces à l'intérieur du boîtier portent des tensions
dangereuses. Seules des personnes qualifiées et bien
entrainées devraient entreprondre l'ótalonnage et la
maintenance.
DISCLAIMER
The information contained in this document is subject to change with-
out notice. Precision Digital makes no representations or warranties
with respect to the contents hereof, and specifically disclaims any
implied warranties of merchantability or fitness for a particular
purpose.
5
www.predig.com
CAUTION: Read complete instructions
prior to installation and operation of
the Meter.
WARNING: Risk of
electric shock.
To Next Page
Loading...
Need help?
General
