Precor 9.31 - The Setup Mode and Quickstart; TM Feature

page 27
The Setup Mode and the QuickStart
TM
Feature
The QuickStart feature can be pressed any time during the Setup prompts. See the
table below.
Note: Default values apply if QuickStart is pressed while the Precor banner is
displayed. Refer to QUICKSTART on page 29.
The following occurs:
You bypass the Setup prompts and your work out begins in the Manual course.
Default values apply.
The profile associated with the course name appears on the display.
The information that appears on the display becomes the workout time for the course.
You can change the display using the ▼ or ▲ keys. See Workout Tips .
Note: You can select an indefinite workout time. By pressing either ▼▲ key, you’ll find
the word "NOLIM" appears on the display where the number zero would normally
appear (between 99 and 1).
The weight (1 through 999) that appears on the display becomes your designated
weight that the M9.31 uses to compute various calculations.
The age (1 through 99) that appears on the display becomes the designated age that the
M9.31 uses for SmartRate
®
. A correct age entry between 1 and 99 is very important if
you plan to utilize the heart rate characteristics of the treadmill. The QuickStart key acts
the same as the Select key at this point because you have answered all the Setup
prompts.
When you first turn the unit ON, the Precor banner scrolls across the display. This
banner indicates that the M9.31 is ready to accept user entries.
Press QUICKSTART at the,...
Precor banner
Course prompt
Time prompt
Weight prompt
Age prompt