page 33
Press Select once again and the Error Log appears. The most recent error log
appears first and scrolls across the display. If the words, “NO ERRORS” appear, no
errors have been recorded.
Up to ten error codes can be recorded and viewed in the following format.
1: ER33 AT 12,345,678 MILES 1,714 HOURS
Error code
Most recent error
Odometer reading at the time the error occurred
The number of hours that the treadmill has been
in use when the error occurred
Note: To clear (delete) the error log, press QuickStart for at least four seconds while
the error log scrolls across the display. Prompts appear on the display and let you
know when the error messages have been deleted (“cleared” from memory).
Important: You cannot retrieve the error log once you have deleted it.
To return to the Precor banner, press Reset, Select, or the red Stop button.
To Next Page
Loading...
