Precor EFX556i - Keys on the Display Console

page 26
COMMERCIAL PRODUCTS DIVISION
KEYS ON THE DISPLAY CONSOLE
The Precor products have an easy-to-use keypad that is activated by the
slightest touch. Remind users that they only need to “lightly touch” these ultra-
sensitive keys.
Each key on the display console’s keypad provides specific functions. Numeric
keys (numbered 1, 2, 3..., through 0) let you enter data in answer to the display
prompts and change the resistance during a workout. The standard keys, CHANGE,
RESET, QUICKSTART
TM
, RESISTANCE ▼▲, and ENTER, let you enter data as
well as control your workout.
The following information explains the different uses of the keys from left to right.
To locate each key, look at the display console or refer to Diagram 16.
Diagram 16 Display console keypad.
Numeric keys: Indicates the
program number, time limit,
weight, or age. During a workout,
use these keys to select a target
resistance.
Note: The CHANGE keys are not shown in this diagram.
Refer to Diagram 8 for their location.
Gently, press and hold the
▼ or ▲ key to change the
resistance.
During the Setup
prompts, accepts
displayed data and
moves to next
prompt.
Exits and
returns to
banner.
QUICKSTART: Bypasses the
remaining Setup prompts and
enters the Manual program.
KEYPAD TIPS
• Accurate entries are required or features such as SmartRate will not work
properly.
• Answer the Setup prompts using the numeric keys or by pressing the ▼ or ▲
keys.
• Press ENTER to select the information being displayed.
• Pressing QUICKSTART bypasses further selections and prompts you to work-
out in Manual mode. Default values apply (see QUICKSTART on page 28).
The SmartRate display does not appear.
• A time-out occurs during the Setup prompts if the EFX detects no key presses
for two minutes. The display returns to the Precor banner.
• Press RESET to return to the Precor banner.