72 Installing and Operating the Personal Viewing System (PVS) for Display C
Wipe all other exposed surfaces with a soft cloth that you
have moistened with a mixture of mild soap and water.
Precor recommends a solution of 30 parts of water to 1
part of Simple Green® (for more information, visit
www.simplegreen.com).
Important: Do not use any acidic cleaners. Doing so will
weaken paint, powder coatings, and other surface finishes and
will void the Precor Limited Warranty. Never pour water or
spray liquids directly onto the screen.
Avoid using any corrosive chemicals on the console or
screen.
Always clean the screen with a pre-moistened wipe or
cloth. To prevent drips from seeping into the screen or
console enclosure, never spray cleaning liquid directly
onto the screen.
Apply cleaners with a soft, lint-free cloth. Avoid using
gritty cloths.
To Next Page
Loading...