c. Install the three anchor bolts and secure using the washer and nut. Fully tighten each
floor fixing anchor bolt and torque to specification [[[Undefined variable Spe-
cifications.QNX-AnchorBolt]]].
d. Fully tighten the four tower anchor bolt and torque to specification [[[Undefined variable
Specifications.QNX-AnchorBolt]]].
e. Reinstall the front floor fixing front mini bar 25s and fully tighten fasteners.
f. Repeat the anchor bolt installation process for each tower.
19
4 Assembly and Installation
Procedure
To Next Page
Loading...
