15
3. Touch the icon for the test mode you want to enable. The icon becomes colored
to show the test is active. Multiple tests can be enabled and run simultaneously.
• Mardi Gras: This test runs the Meters, All Buttons, RGB Buttons, and
Faders routines simultaneously. Laissez les bon temps roulez!
• Meters: All meters in the meter array along the top of the
CS18AI go up and down, creating “the wave” effect.
• All Buttons: Buttons flash on and off in pseudo-random groups.
Multi-color buttons change color but never fully light. Any
given button will light every 10 seconds or so, at most.
• RGB Buttons: This tests only multi-color buttons, putting them
through all of their variations of color and brightness.
• Scribble Strip: All scribble strip displays show the same image patterns.
• Screen Test: Cycles the color touchscreen between primary
colors. Touch anywhere on the screen to exit this test.
• Faders: The channel faders sequence through five different routines. Moving
the master fader from the bottom to the top will cycle through all faders
up, all faders down, faders diagonally positioned from down to up, faders
diagonally positioned from up to down, and wave movement cycles.
To Next Page
Loading...
