Pressroom Electronics PressCam 8 - Page 8

PressCam 8 (all styles, Front panel & Stand alone)
Ordering Procedure
1. Specify Mounting Style
F ......... Front Panel Mounting to be installed in an existing control panel.
C ......... Stand alone NEMA12 enclosure
T .......... Stand alone NEMA12 enclosure with room for the Tonnage Module
2. Specify Output Relays (13)
M ......... Mechanical Dry contact relays SPDT 10A@250VAC
A ......... AC Solid State - single Pole N.O. 3A@140VAC, 12-140VAC, 25-70Hz
D .......... DC Solid State - single Pole N.O. 3A@60VDC, 12-60VDC
3. Specify Controller input power
1 .......... 24VDC
2 .......... 120VAC 50-60Hz
3 ........... 240VAC 50-60Hz
4. Resolver Connector Cabling
30’ (9m) of cable with connectors is supplied standard. If additonal length is needed, specify in
feet, 150’ (46m) maximum.
5. Specify Tonnage Monitoring (optional)
T1 ......... One Channel monitoring with strain sensor and cable
T2 ......... Two Channel monitoring with strain sensor and cable
T3 ......... Three Channel monitoring with strain sensor and cable
T4 ......... Four Channel monitoring with strain sensor and cable
Example Part #
PC8 - C- 2- M- 30’ - T4
Style Power Relays Resolver Tonnage
Tonnage Monitoring (optional)
T1 One channel monitor module with strain sensor and cable
T2 Two channel monitor module with strain sensor and cable
T3 Three channel monitor module with strain sensor and cable
T4 Four channel monitor module with strain sensor and cable