Prima audison AP4.9 bit - Page 51

USER’S MANUAL
51
AP4.9 bit /
9. When successfully completed, a notification window will appear.
In order to be able to use AP4.9 bit again, you must close
the program on the PC and turn off AP4.9 bit.
10. Set the "UPGRADE" switch to the OFF position.
11. Turn AP4.9 bit back on and restart the PC software.
If AP4.9 bit firmware update completed
correctly, the dialogue window will show:
- new AP4.9 bit Firmware version.
12. Repeat the product calibration operations
(see sec. 7.2).
8
0
1
2
3
4
5
6
7
POWER - 12V
USB
OPTICAL SEL.
1 2 3 4 5
1 2 3
4 5 6
76
8
UPGRADEPRESETS
SPEAKER
OUT
OPTICAL IN
DRC
SUB OUT
INPUTS
ASP
OFF ON
REM IN
REM OUT
MASTER ENABLE
30A