-!connect or disconnect devices attached to the 4 USB 2.0 ports
This feature is convenient in case of temporary crash of autoguider or planetary camera (or other devices), which can then
be reactivated without the need to go to the telescope and disconnect/reconnect the cable.
Click with the left mouse but-
ton (or a single tap on the
screen of tablet or smartphone
used for remote control) on
one of the power out ports to
activate it, the port will become
green and it will connect the
device. Double click on the
NAME label to change its
name.
-!check for power in voltage and battery lifetime
if you power your EAGLE with a battery, a dedicated menu
allows you to set the Ampere capacity of your battery and
charge percentage when EAGLE is powered on, enabling you
to monitor its expected lifetime.
To Next Page
Loading...