-
remotely turn on/off the entire telescope
EAGLE has a standard ON/OFF button to turn on/off the unit but you can also turn off the whole system remotely. After
switching on the EAGLE, the user can activate remotely connected devices and use the telescope. At the end of the captu-
re, the user first turns off the various devices (camera, mount, etc.) and then the EAGLE.
Press the ADVANCED SETTINGS button and, in the window that opens, you can set the switch ON/OFF setting you prefer
for the POWER button of the EAGLE Manager software. In order to switch off the EAGLE when you press the POWER but-
ton, please select the “Power off” setting. You can also select the “Standby” mode (useful for remote power in when EA-
GLE2 is connected to a wired network, please see next paragraph) or “Restart” (to restart it). Click OK to confirm. To switch
off EAGLE now you can press the POWER button.
To Next Page
Loading...