PrimaLuceLab EAGLE4 - Page 61

PrimaLuceLab S.p.A. EAGLE4 User Manual
4) In the “ASCOM Telescope Chooser” window select “Proprierties” and the “ASCOM configuration” window will open. Set the right
number port in “Port” field and then press OK to close the window.
5) Press OK in the “ASCOM Telescope Chooser” window and then press the “Connect” button in the “ASCOM interface” window. The
red button will become green and the EQMOD window will appear. Now you’re connected to the mount and you can remotely con-
trol it.
page 60
Actual telescope position