Primera C-1000 - Identifying the Parts

4 Getting Started
C. IDENTIFYING THE PARTS
Front Panel
The illustration below shows the printers front panel:
The front panel includes:
 3 LED indicators (READY, MEDIA and RIBBON)
 3 buttons (FEED, PAUSE and CANCEL)
LED Indicators
There are three LED indicators on the front panel labeled
READY, MEDIA and RIBBON. These indicators display
the operational status of the printer.
The READY indicator will remain lit except
during the following conditions
- The printer is in PAUSE state.
- A fault condition has occurred.
The MEDIA indicator will remain lit except
when the media (labels or ribbon) has run out.
ON  lit when using thermal transfer mode
with ribbon installed.
OFF  not lit when in direct thermal mode (no
ribbon installed).
Blinking  ribbon has run out.
RIBBON
MEDIA
READY
CANCEL/
PAUSE/
RESET
CALIBR.
FEED/
RIBBON
MEDIA
READY
CONFIG.
510172_r1.qxd 3/21/2001 6:25 PM Page 4
All manuals and user guides at all-guides.com