6 Label Stock
Roll Specifications
Note on Label Orientation: If you are using an applicator to apply your labels, be sure to
order label stock with the correct orientation for your applicator. For example: most applicators will
apply the side of the label first, so you will want to print the labels sideways.
B. Installing Label Stock
The following steps will guide you through loading label stock in your printer:
Make sure power is connected and printer is on.
1. Open the Top Cover.
e I.D.
Core O.D.
3”
(76.2mm)
6”
(152.4mm)
Label Stock
Lift Here
To Next Page
Loading...
