40 PROGRAMMING MANUAL 100962 G PUBLICATION DATE 24 JUN 2008.DOC
T EDIT A PROGRAM
• Editing a program is changing the program by selecting a
new element from a list or by changing values in an
existing program. You can also add, insert or delete steps in
an existing program.
• Press the ARROW DOWN button if you don‘t want to Edit the
program.
• Press the ENTER button if you want to Edit the program.
Goto } °
T IMPLEMENTING A NEW PROGRAM
• When you want to create a new program, you have to make
use of the add step function. By adding steps the new
program will grow step by step.
• Press the ARROW DOWN button if you don‘t want to
program a new wash program.
• Press the ENTER button if you want to implement a new
program.
• A confirmation is asked to delete the old program.
P: Delete Old Program? No
• Press the ENTER button if you don‘t agree to delete the
old program. Goto { ®
• Press the YES and ENTER button to confirm if you want to
implement a new program. Goto } °
T COPYING A PROGRAM
• If you want to create a new program, sometimes it’s easier to
make a copy of an existing program and to make some small
changes to your new copy.
• Press the ARROW DOWN button if you don‘t want to Copy a
program.
• Press the ENTER button if you want to make a copy from
another program.
• A confirmation is asked to delete the old program.
P: Delete Old Program? No
• Press the ENTER button if you don‘t agree to copy the old
program. Goto { ®
• Press the YES and ENTER button to confirm if you want to
implement a new program.
P: Program N°XX
Edit
P: Program N°XX
New
P: Program N°XX
Copy
To Next Page
Loading...
