100962 G PUBLICATION DATE 24 JUN 2008.DOC PROGRAMMING MANUAL 41
• Insert the desired program number from which you want to
copy the program.
• Press the ENTER button as a confirmation. Goto { ®
Attention
!
The standard programs can be selected at the program
numbers 101-115.
Program number 101 corresponds with Standard Program 1.
Program number 102 corresponds with Standard Program 2.
…
Program number 115 corresponds with standard Program 15.
T DELETE A PROGRAM
• If you want to get rid of an existing program, use the delete
program function. The complete program will be erased at
once.
• Press the ARROW DOWN button if you don‘t want to
Delete the program.
• Press the ENTER button if you want to delete a program.
• A confirmation is asked to delete the old program.
P: Delete Old Program? No
• Press the ENTER button if you don‘t agree to delete the old
program. Goto { ®
• Press the YES and ENTER button to confirm if you want to
delete the old Program.
Goto { ®
T EXIT THE PROGRAM MENU
↵
• Press the ENTER button if you want to leave the PROGRAM
Menu.
Attention
!
With the ARROW UP button you can go back to a previous
menu item.
P: Copy from
Program N° _ _ _
P: Program N°XX
Delete
P: Program
Menu Exit
!
!
To Next Page
Loading...
