Primus RF18 - Page 70

68 PROGRAMMING MANUAL 100962 G PUBLICATION DATE 24 JUN 2008.DOC
↵
• You can always return to a previous menu item by pressing
the ARROW UP button.
• By pressing the ENTER button you will leave the current
Step. Goto } ®
ATTENTION
!
R - MACHINES ONLY. THE REVERSING ON – OFF TIMES FOR THE DRAIN SEQUENCE ARE THE
SUGESTED DEFAULT VALUES. SEE THE INITIALISATION MENU.
T THE EXTRACT SEQUENCE
Only for washing machines with 1 motor. ( INVERTER DRIVE)
• Only available on washing machines with both : a
normal Open and a normal Closed Drain valve.
• You can select Drain Valve 1 or 2.
• The default Drain valve is Drain valve 1.
• You have to select the a Drain Valve by pressing the
ARROW LEFT or RIGHT button.
• Press the ENTER button for confirmation.
• The programmable speed depends on the machine type.
• For the correct speed values and speed limits See
paragraph 3.4.
• The Extract Sequence can be programmed between 0 and
9.5 minutes in steps of 0.5 minutes.
• The default time is 4.5 Minutes.
• Programming a time of 0 minutes : the Extract part will not be
functional (cfr No Drain)
• Insert the desired Extract sequence time. Press the ENTER
button for confirmation.
↵
• You can always return to a previous menu item by pressing
the ARROW UP button.
• By pressing the ENTER button you will leave the current
Step. Goto } ®
Drain
|
Extract
|
Low Extrac
t
|
Hi
g
h Extrac
t
|
No Drain
|
Static Drain
P:Pr XX Step XX
Drain valve : 1
P:Pr XX Step XX
RPM : _ _ _
P:Pr XX Step XX
Time : 4,5 Min
P: Program
Ste
p
XX Exit
P: Program
Ste
p
XX Exit
1 | 2 | 1+2
!