Submenu
113
• Disable. A vertical 1/10 of an inch parameter is used as 7/72 of
an inch. The absolute move is slightly smaller than expected.
For example, a one inch move would be 70/72 of an inch.
Vertical moves that have the same value will be identical in
length.
Absorb after ^PY
• Absorb Motion. The first paper motion following a ^PY
command will be ignored.
• Absorb All. The system ignores all the data and terminator
until a host generated motion terminator is detected.
• Disable. System terminators following a graphics command
are sent to the printer and result in paper motion.
UPC Descenders
• Enable. UPC/EAN barcodes are printed with descenders, even
if there is no human readable data.
• Disable. UPC/EAN barcodes are printed without descenders if
there is no human readable data.
Rot. Char Size
• Adjusted. Rotated (clockwise/counterclockwise), expanded
characters have a different size than an unrotated character
with the same size parameters.
• Not Adjusted. Rotated, expanded characters will be the same
size as unrotated characters with the same size parameters.
Ignore Spaces
• Disable. Trailing spaces are not deleted from alphanumeric
elements in a graphics pass.
• Enable. Trailing spaces are deleted from alphanumeric
elements in a graphics pass.
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
To Next Page
Loading...
