17
2 Setting Up The Printer
Before You Begin
Read this chapter carefully before installing and operating the
printer. The printer is easy to install. However, for your safety and to
protect valuable equipment, perform all the procedures in this
chapter in the order presented.
Power Requirements
The printer must be connected to a power outlet that supplies 88 to
135 Volts AC or 178 to 270 Volts AC at 47 to 63 Hz. The printer
automatically senses and adjusts itself to conform to the correct
voltage range.
Primary circuit protection is provided by the power switch, which is
also a circuit breaker. Consult an electrician if printer operation
affects local electrical lines. See “Electrical Characteristics” on
page 245 for additional power specifications.
IMPORTANT
It is recommended that printer power be supplied from a
separate AC circuit protected at 10 amperes for 120 volts or 5
amperes for 230 volts at 50 or 60 Hertz.
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
To Next Page
Loading...
