P-Series Emulation
155
P-Series Emulation
Control Code 06
Control Code 06 defines the function of ASCII code hex 06 (ACK).
You can select an alternate line spacing of 6, 8 or 10.3 LPI.
Control Code 08
Control Code 08 defines the function of ASCII code hex 08 (BS).
You can define the code to output an elongated character or a
backspace.
Printer
Protocol
(from page 147)
Control Code
06
Control Code
08
Define CR
Code
Auto LF
Overstrike Define LF
Code
Select
SFCC
VFU Select Alt. Set
80-9F
Character
Set
SFCC d
Command
PSeries Dbl
High
6.0 LPI
8.0 LPI*
10.3 LPI
Elongated*
Backspace
CR = CR*
CR = CR + LF
Disable*
Enable
Enable*
Disable
LF = CR + LF*
LF = LF
1*
(0-7F hex)
EVFU*
DVFU
CVFU
Disable
Control Code*
Printable
(see page 159) Even dot plot*
Double High
Normal*
P3/4/6/9 Compat.
* = Factory Default
P-Series
FF Valid
at TOF
Enable*
Disable
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
To Next Page
Loading...
