System Monitor
100
System Monitor Interface
Overview
The System Monitor 3.0 interface provides remote monitoring, a feature that helps you access
multiple clients through a single console for remote device management. The System Monitor
immediately recognizes equipment and provides real-time equipment maintenance, which
improves system stability and reliability.
Remote Monitoring monitors system status of remote devices. The monitored items include hard
disk temperature, hard drive health, network connection, CPU temperature, system voltages,
system fan status and UPS status.
Remote Monitoring also provides support for function logs so that managers can regularly check
the status of their remote devices.
The System Monitor sends notification and makes an entry in the event log.
NOTE: When configuring the System Monitor, it is not possible to create a group/device as the
virtual keyboard is not accessible from configuration. The work around consists of plugging in a
physical keyboard.
System Monitor Requirements
The table describes the software requirements:
Description Software
Framework Microsoft.NET Framework version 2.0 or higher
Driver Software 4.0 API
To Next Page
Loading...