Characteristics
24
Interface Characteristics
Serial Interface
USB Interface
Ethernet Interface
NOTE: I/O ports (such as serial, USB, and Ethernet interfaces) on this product have internal port
numbers that may differ from physical port numbers, such as "COM1", "USB1" or "ETH1", printed
on the product and used for identification in this manual. Check the port numbers in your
environment.
Element Characteristics
Type 1 x RS-232/422/RS-485, (RS-485 with auto data flow control), modem-capable, not
electrically isolated and 1 x RS-232 (COM1: RS-232 only)
Amount 2
Transfer rate Maximum 115.2 kbps
Connection D-Sub 9-pin, plug
Element Characteristics
Type 1 x USB 3.0 and 1 x USB 2.0
Amount 2
Transfer rate Low speed (1.5 Mbit/s), full speed (12 Mbit/s), high speed (480 Mbit/s), and super
speed (5 Gbit/s) USB 3.0 port only
Current load Maximum 1 A per connection
Connection Type A
Element Characteristics
Type RJ45
Amount 2
Speed 10/100/1000 Mbit/s
Ethernet controller No supporting IEC 1588
To Next Page
Loading...