Pro-face PS5000 Series - Cfast Card Installation

Hardware Modifications
70
CFast Card Installation
Introduction
The Slim Panel operating system views the CFast card as a hard disk. Proper handling and care
of the CFast card helps extend the life of the card. Familiarize yourself with the card before
attempting insertion or removal of the card.
Before installing or removing a card, shut down Windows in an orderly fashion and remove all
power from the device.
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH
 Remove all power from the device before removing any covers or elements of the system, and
prior to installing or removing any accessories, hardware, or cables.
 Unplug the power cable from both the Industrial Personal Computer and the power supply.
 Always use a properly rated voltage sensing device to confirm power is off.
 Replace and secure all covers or elements of the system before applying power to the unit.
 Use only the specified voltage when operating the Industrial Personal Computer. The DC unit
is designed to use 24 Vdc input.
Failure to follow these instructions will result in death or serious injury.
CAUTION
MEMORY CARD DAMAGE AND DATA LOSS
 Remove all power before making any contact with an installed memory card.
 Use only memory cards sold by Pro-face as accessory for this product. The performance of
the Industrial Personal Computer has not been tested using memory cards from other
manufacturers.
 Confirm that the memory card is correctly oriented before insertion.
 Do not bend, drop, or strike the memory card.
 Do not touch the memory card connectors.
 Do not disassemble or modify the memory card.
 Keep the memory card dry.
Failure to follow these instructions can result in injury or equipment damage.