6
FUNCTION BUTTON
MODE 1. To select each function for presetting.
2. to enter and switch to the next function after presetting.
SET
To make upward adjustment of each function datas of time, count and calories.
RESET To reset each single function of count, Time and calories
TOTAL RESET To Clear all preset datas and restart the computer.
FUNCTIONS
SCAN Automatically scans throught each function in every 6 seconds.
TIME COUNT UP The monitor will count workout time from 00:00 up to 99:59.
COUNT DOWN If you have preset target time, the monitor will count down to 00:00 when you start training.
(COUNT) COUNT UP: Accumulates workout numbers from zero.
COUNT DOWN: If you have preset target count numbers, the monitor will count from
preset down to zero when you start training.
(TOTAL COUNT)
The monitor will accumulate total workout numbers of different training durantion after the
monitor is intalled with batteries. This data could be reset to zero only when you replace batteries.
CALORIES COUNT UP: Accumulates calories consumption during training.
COUNT DOWN: If you have preset target calories, the computer will count from preset
calories down to zero. This data is a rough guide only and should not be used as com-
parison over several exercice sessions.
NOTE :
Without any signal transmitted to the monitor for 4 minutes, the LCD will shut off automaticly and all function da-
tas would be kept. The prevuious datas would display on the monitor when you come back training on the equip-
ment or directly display by pressing any button.
The monitor starts beeping to remind you as soon as any preset target datas is achieved to zero.
Battery specication : 1.5 V AA (2pcs)
To Next Page
Loading...
Need help?
General
