- 13 -
Pro Spot PR-8
GB/US/2000-08 PRO SPOT
D. Operation
4) The welding electrodes, the wheel, the
slide-hammer electrode and the rivet holder
all feature a conical shank and can be fitted
on the same adapter.
5) The slide-hammer tool (for pulling out
dents) is intended to be screwed directly into
the welding gun handle. Make sure that the
locating pin fits into the corresponding
groove. Select the particular part to suit the
work. See the Welding Devices section.
D3. Fitting the welding device (continued)
To Next Page
Loading...
