Pro Spot PR-8 - F. Technical Specification; F1. Technical Data

- 19 -
Pro Spot PR-8
GB/US/2000-08 PRO SPOT
F. Technical specification
F1. Technical data
Permissible load : Duty cycle % 2.5% maximum load.
Supply voltage : 208 - 240 Volt, 60 A
: 400 - 440 Volt, 40 A
: 3 phase, 50/60 Hz
Output voltage : 15V
Welding current : 200-9500 A (see diagram)
Cable length : Up to 3 m (normally 3 m)
Welding cable area : 150 mm²
Cooling : Air + fan
No. of operating modes : 6
No. of programs : 60
Air supply pressure : 5 bar (C-tong), 6 - 8 bar (X-tong)
Degrees of protection : IP 23
Pro Spot PR-8 meets the following directives:
ETL and C-ETL Listed Mark, Low Voltage Directive LVD(73/23/EEC), The EMC Directive
(89/336/EEC), The Machinery Directive (89/392/EEC).