- 1 -
Pro Spot PR-8
GB/US/2000-08 PRO SPOT
Preface
The photographs and drawings in this manual are merely illustrative and do not necessarily
represent the actual appearance of equipment available. The equipment is designed to be
used in accordance with established practices and in observation of applicable safety re-
gulations. The design of the equipment presented in this manual may be changed without
prior notice.
You have just bought a Pro Spot PR-8.
The use of microprocessor control in our vehicle body welding equipment has
many benefits. It means, for example, that a wide range of features is available to
the operator.
The microprocessor is programmed in the same way as an ordinary computer. It
includes software that enables the operator to control energy input to suit the
particular application or conditions. Repair work quality can be checked with an
acoustic signal, while a display helps the operator to control and set up the
machine.
Read this instruction book to appreciate how versatile the Pro Spot PR-8 is.
To Next Page
Loading...
