MT-1/WT3 User Guide
Page • 81
Appendix F
Recommendations
Probewell Lab Inc. suggests that you respect the following recommendations to get
maximum use out of the MT-1/WT3 and its accessories for many years to come. Any
unauthorized modifications or broken seals will immediately void the warranty
and any further services.
MT-1/WT3
• Do not try to open the MT-1/WT3 socket; there are no serviceable parts inside.
• Never block the air vents on the MT-1/WT3 socket.
• Never expose this equipment to bad weather or direct rain.
• Keep the front jaws and rear tabs clean. Use lubricant for electric contacts. Do
not use abrasive materials.
• Never use solvent to clean the MT-1/WT3. Use a soft moist cloth with non-
abrasive soap to clean the surface.
• Handle the MT-1/WT3 with care.
Metercam and Optical Pickup
• Do not try to open; there are no serviceable parts inside.
• Never expose this equipment to bad weather or direct rain. Do not expose to
direct sunlight for long periods of time.
• Keep the Metercam’s back window and suction cups clean. Do not use abrasive
materials. Use a soft moist cloth with non-abrasive soap to clean the surface. Use
mineral oil to soften hardened suction cups.
• Handle both pickups with care. Use one of the side pouches inside the carrying
bag to store the Metercam and the Optical Pickup.
To Next Page
Loading...