Probewell MT-1/WT3 - Connecting to the MT-1;WT3; Running the Application

MT-1/WT3 User Guide
Page • 25
Connecting to the MT-1/WT3
This section explains how to connect to the MT-1/WT3 over WiFi for a quick start.
For more detailed information, please refer to the Probewell Connect for WT Series
documentation.
Setting up the connection
First, power up the MT-1/WT3 with the “On/Off” switch.
Probewell Connect for IOS and Android
Open the application on your mobile device.
How to get the app:
For iOS: Go to the Apple App Store.
For Android: Go to Google Play Store.
Search for “Probewell Connect”.
Scan QR for a first use or select known socket SSID.
For a Probewell Connect App for Windows 10
1
Go to “Windows Settings.”
Select “Network & Internet.”
Click on “Show available networks.”
Locate the socket SSID within the available networks list.
Input the SSID name as the security key. (i.e., PW-WT3-{S/N}-AP). This number is
located under the QR code on the side of the tester.
Wait to be connected to the socket.
Start the Probewell Connect* application from your computer.
Note
When the procedure has been completed once, the SSID will be
accessible directly from the network list.
Probewell Connect for Windows is downloadable from our
website.
(https://probewell.com/pw-connect/)
Running the Application
Please refer to the Probewell Connect User Guide.
1
We recommend Windows 10; other versions are not being tested.