Need help?Do you have a question about the PROEL DSO480 and is the answer not in the manual?
General| Brand | PROEL |
|---|---|
| Model | DSO480 |
| Category | Music Equipment |
| Language | English |
Describes how to edit channel parameters using the device's controls.
Explains how to navigate the device's menu system and sub-menus.
Lists the main categories and functions within the device's menu system.
Provides important usage information and operational tips for the device.
Expresses gratitude to the user for choosing the PROEL DSO480 product.
Instructions for safely removing the device from its packaging.
Provides a general overview of the DSO480's capabilities and purpose.
Highlights the main characteristics and benefits of the DSO480 unit.
Describes the device's display and its various functions and information.
Explains the function of the navigation and selection buttons.
Details the function and operation of the adjustment knobs.
Explains the indicator lights for digital inputs and status.
Describes the controls and monitoring for the input signal paths.
Describes the controls and monitoring for the output signal paths.
Explains the power switch, fuse, and mains inlet.
Details the serial communication port for PC connectivity.
Explains the 3-pin XLR output connectors for audio signals.
Describes AES input switch and related connectors.
Outlines the initial configuration steps for the device.
Shows the processing blocks available on input channels before routing.
Details the processing blocks available on output channels after routing.
Explains pre-defined input-to-output signal paths for system setup.
Details the adjustable input gain control range and steps.
Explains the input delay parameter and its maximum available value.
Describes the eight bands of parametric equalization available on inputs.
Details the adjustable output gain control range and steps.
Explains how to switch the polarity (phase) of each output individually.
Describes the output delay parameter and its maximum available value.
Explains the high-pass crossover filter settings and frequency range.
Details the low-pass crossover filter settings and frequency range.
Describes the nine bands of parametric equalization available on outputs.
Details the adjustable program limiter parameters like attack, release, and threshold.
Describes the clip limiter for enhanced peak protection and zero overshoot.
Describes how to link input and output parameters for synchronized adjustment.
Overview of storing and recalling settings via the Global Memory menu.
Overview of input parameter menus and their functions.
Overview of crossover configuration menus and options.
Overview of system status, settings, and general options.
Overview of unit locking and password protection functions.
Overview of digital audio interface menus and status.
Detailed explanation of memory functions: recall, store, and erase.
Detailed explanation of input parameter menus like ganging and reset.
Detailed explanation of crossover configuration menus: design and ganging.
Detailed explanation of interface configuration for remote control.
Detailed explanation of system status, LCD contrast, brightness, and time.
Detailed explanation of security and locking options and password entry.
Detailed explanation of AES/EBU status information.
Describes the serial communication interface for remote control.
Details the physical connection setup for RS232 remote control.
Instructions for updating the unit's firmware via the RS232 port.
Details the selection and status of digital audio inputs.
Options for customising security lock settings per parameter group.
Describes how to set a four-digit security code for locking.
Instructions on how to unlock the device using a code.
Procedure for password recovery if the original code is lost.
Explains the primary output limiter and its adjustable parameters.
Describes the secondary clip limiter for enhanced peak protection.
Describes how to link input and output parameters for synchronized adjustment.
Describes the standard parametric EQ band controls and effects.
Describes shelving EQ filter characteristics and controls.
Explains how to achieve a flat-topped EQ curve using specific bands.
Details the bandpass filter controls, effects, and response.
Explains the notch filter controls, effects, and response.
Describes the all-pass filter's phase-shifting properties and controls.
Explains the phase filter's frequency and phase shift controls.
Details variable Q filters for turnover frequency damping and overshoot.
Explains elliptical filters for achieving steep roll-offs.
To Next Page