ENGLISH
Bedienungsanleitung / Instruction manual Profitec PRO 600 - I 22
3.3 PID-Temperature Control
The function of a PID-Temperature Control is to regulate the temperature of both boilers. The temperature of
the boilers are programmable and controlable independently from each other. You have the possibility to
extract coffee at varying temperatures and steaming with different pressure. PID stands for “proportional-
integral-derivative” The temperature plays an integral role in coffee preparation.
The PID-control shows the temperature of the coffee boiler and the steam boiler alternately. The position of
the period indicates which boiler´s temperature is currently being displayed.
Temperature coffee boiler (t1, here 92°C)
-period in the 1st position
Temperature steam boiler (t2, here 124°C)
-period in the 2rd position
Caution!
Danger of injury: The following parts are hot or may become hot:
• Area of the valves
• Steam wand and hot water wand
• Brew group
• Portafilter
• Body (upper part and side frames)
The installation is to be carried out exclusively by qualified specialists, according to the
following instructions and in compliance with valid laws and local regulations.
4.1 Preparation for installation
• Place the machine on an even and stable surface.
• Never place the machine on hot surfaces.
• Place the machine on a water-proof surface, as the machine may at some point leak
water.
4.2 Electrical connection
• Make sure that the local main voltage supply corresponds to the information given on the
type plate on the front panel of the espresso machine.
• Plug the machine into a grounded socket only and do not leave it unattended.
• Do not roll or bend the power cord.
• Do not use an extension cord/ do not use a multiple socket.
5 FIRST USE
Read the instruction manual carefully prior to operating the machine.
Prior to starting the machine, check if:
• the machine is switched off. (Power switch in the vertical position.)
• the power cord is disconnected.
• the drip tray is inserted accurately.
• the steam and hot water valves are closed.
• the machine is placed on a water-proof surface.
To Next Page
Loading...
