EasyManua.ls Logo

Profitec Pro 600 - TRANSPORT AND STORAGE; Original Packaging; Safe Transportation Guidelines; Storage Recommendations

Profitec Pro 600
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISH
Bedienungsanleitung / Instruction manual Profitec PRO 600 - I 30
7
Insert the shower screen into the
brew group.
8
Take the portafilter without filter.
9
Clamp the portafilter into the
brew group.
10
Then, move the portafilter until
the shower screen is locked
firmly into the gasket.
11
Now you can easily lock the
portafilter with filter into place.
12
The group is ready for use.
The machine can be used again, as described in chapter 6 of the instruction manual.
The steam nozzle is blocked
Clean the holes of the steam nozzle carefully with a needle or with a paper clip.
For this purpose, the steam nozzle may be unscrewed as well.
Afterwards replace the steam nozzle.
8 TRANSPORT AND WAREHOUSING
8.1 Packing
The PRO 600 is delivered in a special carton and protected by a plastic cover and foam.
Caution!
Keep packing out of the reach of children!
Important
Keep packing and packing material for possibile transport! Do not throw it away!
8.2 Transport
Transport the machine only upright, if possible on a pallet.
Do not tilt or turn the machine over.
Do not stack more than three units on top of each other.
Do not place other heavy items on the packing.
8.3 Warehousing
Keep the machine packed in a dry place.
Do not stack more than three units on top of each other.
Do not place other heavy items on the packing.

Table of Contents

Related product manuals